ENGLISH
15
Self-Cleaning
To avoid possible
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the
oven when opening the door to
allow hot air or steam to escape.
DO NOT
force the
oven door open. This can damage
the automatic door locking
system. Use caution and avoid
possible burns when opening the
door after the Self-Cleaning cycle
has completed. The oven may
still be VERY HOT.
If you are planning to use the oven directly after a self-clean cycle remember to allow
time for the oven to cool down and the oven door to unlock. This normally takes
about 1½ hour. So a self-clean cycle (3 hours) will actually take about 4½ hours to
complete. The time remaining for the self-clean cycle will be displayed in the oven
control display.
To set the controls for a Self-Cleaning cycle
1.
Be sure the oven door is closed.
2.
Turn both the selector and the temperature control knobs to
Clean
position.
3.
As soon as the control is set, the motor driven oven door lock will begin to close
automatically. While the door is locking, the
icon will flash and then will
remain visible for the entire self-clean cycle.
Note:
Allow about 20 seconds for the oven door lock to close.
When the Self-Clean Cycle is Completed
1.
Turn the selector and the temperature control knobs back to
Off
position.
2.
Once the oven has cooled down for approximately 1½ HOUR, the oven door can
then be opened. While the door is unlocking, the
icon will flash and then will
disappear from the oven control display.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive
smoke or fire in the oven:
1.
Turn the selector and the temperature control knobs to
Off
position.
2.
The oven door can only be opened after the oven has cooled down for approximately 1½ HOUR.
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and
temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual
oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting
that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an
adjustment is needed.
To adjust the oven temperature
1.
Press and hold the
button until “00” appears in the oven control display.
2.
To increase the temperature use the
button to enter the desired change; and to decrease the temperature use the
button (a minus sign will appear in the display indicating the temperature is decreased).
3.
Wait 5 seconds for the change to be accepted by the oven control.
Note:
The oven temperature adjustments made with this feature will not change the Self-Clean or Broil temperature.
Once the temperature has been changed, the temperature indicator will still display the value set from the
temperature knob but the actual temperature in the oven will be higher or lower.
Self-Clean Cycle Time Length
