INSTALLING THE RANGE
12
TEST RUN
Check if the range is properly installed and run a test cycle.
1. Touch
Clear/Off
to start test.
2. Set the elements to Hi to check that the surface heating
elements are working properly. The elements should glow
red and radiate heat, and they should cycle on and
off periodically even when set to the Hi position. This
cycling prevents the glass-ceramic from being cracked
by thermal shock.
IMPORTANT
: The warm zone does not consume enough
power to glow red.
3. After checking all the surface heating elements, check
the locking system by touching Start for three seconds.
The oven door should lock and the cooktop should not
operate while the Lockout function is turned on. touch
Start for three seconds to disable Lockout.
4. Now check the ovens' operation. Touch Bake and touch
the number keys to set the upper oven temperature to
350°F. Repeat for the lower oven.
5. The ovens should finish preheating in 15 minutes, and the
convection fan should operate while the lower oven is
preheating.
6. After checking the ovens' operation, turn the temperature
up to 450°F and leave the ovens on for at least an hour
to help remove any oil which might cause smoke and
odors when first using the ovens.
Smoke may come out of the range when it is first
used.
NOTE
