K. REMOVING THE TURNTABLE MOTOR
(1) Remove the glass tray and rotating ring.
(2) Remove the turntable shaft VERY CAREFULLY
with a hand. (Figure 22)
(3) Remove the base plate by removing 8 screws
securing it to the oven cavity. (Figure 23)
(4) Disconnect the leadwire from the turntable motor
terminals.
(5) Remove the 1 screws securing the turntable motor
to the oven cavity ASS'Y. (Figure 24)
NOTES:
•
Remove the leadwire from the turntable motor
VERY CAREFULLY.
•
Be sure to grasp the connector not the wires when
removing.
Wire Leads
Turntable Motor
Figure 24
Figure 22
Figure 23
7-11