4
CONNECT THE FILTER TO A FAUCET
3.
Install the fittings, as needed, on the faucet. If you use the additional adaptor
(FIG. 3C) be sure toplace the 3/4" and 13/16" gaskets as shown.
Before
tightening, be sure the collar is on the chrome adaptor.
and hand tighten only.
Note:
It is internally slotted to
accept a coin.
FIG. 3
3/4” dia.
13/16” dia.
15/16” dia.
GASKETS
(actual sizes)
b
7/8” dia.
A
B
C
gasket, 3/4” dia.
gasket, 7/8” dia.
(2 required on
some faucets)
gasket, 13/16” dia.
gasket, 15/16” dia.
collar
collar
collar
55/64–27 UNS
external
adaptor,
threaded
end down
adaptor (chrome),
threaded end
down
adaptor,
threaded
end up
adaptor
gasket, 15/16” dia.
gasket, 15/16” dia.
gasket, 13/16” dia.
13/16–27 UNS
internal
15/16–27 UNS
internal
SINK FAUCET
SINK FAUCET
SINK FAUCET
4.
Using the 15/16" gasket as shown in FIG. 4, page 5, fasten the faucet filter to the
adaptor(s) installed in step 3. You can position the faucet filter as shown in FIG.
4, with the water diverter control to the right. You can also turn the filter so the
control is to the left, or position as otherwise desired. Turn the collar onto the
filter,
being careful not to cross-thread.
Tighten securely, but
do not
overtighten and break
the filter.
IF YOU HAVE QUESTIONS, CALL TOLL FREE, 1-800-426-9345
continued