15
Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and
moisture-proof. Rewrap if necessary. See the following chart for
storage times. When storing meat longer than the times given,
freeze the meat.
Fresh fish or shellfish .........................use same day as purchased
Chicken, ground beef, variety meats (liver) ......................1-2 days
Cold cuts, steaks/roasts...................................................3-5 days
Cured meats ...................................................................7-10 days
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or
plastic containers with tight lids.
Wine Trivet / Can Rack
(on some models)
Can be used in the Gourmet Pantry™ drawer or on a shelf.
Bottles or cans may be placed crosswise, or a single bottle can
be placed in the center.
DOOR FEATURES
Your model may have some or all of these features.
Built-In Door Organizer
The vertical organizer, in the left-hand side door, is designed to
hold cans, bottles, baby bottles or yogurt containers.
Door Bins
To remove and replace the bins:
1. Remove the bin by lifting it up and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
Dairy Center
To remove and replace the dairy center:
1. Remove the dairy center by raising and holding the cover up
while lifting the dairy center up and pulling it straight out.
2. Replace the dairy center by sliding it in above the desired
support and pushing it down until it stops.
Fresh-N-Ready Bin™
This bin keeps healthful snacks such as fresh fruits and
vegetables convenient for the whole family. It includes a
removable berry basket for rinsing and storing delicate items
such as grapes and berries.
To remove and replace the bin:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired supports
and pushing it down until it stops.
To remove and replace the bin parts:
1. Press either release button to open the tilt-out portion of the
bin.
2. To remove the tilt-out portion of the bin, press in on the
curved levers on each side of the bin. Pull up and out.
NOTES:
■
The bin can not be removed if it is tilted out all the way.
Tilt it only part of the way before pressing the curved
levers to remove it.
■
Clean the parts as instructed in the “Cleaning” section.
3. Reinstall the tilt-out portion of the bin. Be sure it is properly
seated in the bottom of the bin before inserting the curved
levers into position.
A. Release buttons
A. Curved lever
A
A
