21
Glassware/Flatware Spotted or Cloudy
•
Check water hardness. For extremely
hard water, it may be necessary to install
a water softener. (See Detergent Chart).
•
Water temperature may be low. Avoid
extremely low or high temperatures. (See
Factors A
ff
ecting Performance).
•
Avoid overloading and improper loading.
(See Preparing and Loading Dishes).
•
Use fresh detergent. Old detergent is
ine
ff
ective.
•
Make sure rinse aid dispenser is
fi
lled.
•
Check to see that proper amount of
detergent is being used for cycle selected.
(See Detergent Dispenser).
•
Home water pressure may be too low-it
should be 20 to 120 pounds per square
inch (psi).
Dishware Chipped
•
Load with care and do not overload. (See
Preparing and Loading Dishes).
•
Place delicate items in top rack.
•
Place glasses securely against pins and
not over pins.
•
Load items so they are secure and don’t
jar loose when moving racks in and out.
Move racks in and out slowly.
•
Make sure tall glasses and stemware will
clear top of tub when rack is pushed in.
•
Fine antique china and crystal should be
hand-washed.
Dishwasher Leaks
•
Use only fresh detergent designed
for automatic dishwashers. Measure
detergent carefully. Try a di
ff
erent brand.
Solutions to Common Dishwashing Problems
Dishware Stained or Discolored
•
Tea and co
ff
ee can stain cups. Remove
the stains by hand washing in a solution
of 1/2 cup (120 ml) bleach and one quart
(1L) of warm water. Rinse thoroughly.
•
Iron deposits in water can cause a yellow
or brown
fi
lm. A special
fi
lter installed
in the water supply line will correct this
problem. (See Removing Spots and Film).
•
Aluminum utensils can leave gray/black
marks when they rub against other items.
Load Properly.
•
Certain high acid foods can cause
discoloration of stainless steel and plastics
if allowed to sit for a long period. Use
the Rinse Only cycle or rinse by hand if
not operating dishwasher at once.
•
Mixing stainless steel and silver utensils
in silverware basket can cause pitting of
the stainless steel blades. Avoid mixing
stainelss steel and silver.
Etching
•
Using too much detergent especially in
soft or softened water causes damage
that looks like a
fi
lm but cannot be
removed.
