9
Locate hole plugs in the small bag supplied
with washer instruction guides. Cut them
apart from each other and insert them in the
holes in washer back panel.
Installing hole plugs
x 3
x 3
x 2
Removing shipping hardware
Remove all of the following from the back of
the washer:
• 3 shipping bolts
• 2 plastic clamps
• 3 shipping spacers
Installation Instructions
NOTE
Rubber expansion material on spacers
may need time to relax before they can be
easily pulled through shipping hole.
IMPORTANT
Save all shipping bolts and spacers for
future use. If the washer is to be transport-
ed at a later date, the shipping hardware
must be reinstalled to help prevent ship
-
ping damage.
