8
Cycle Options
Operating Instructions
To select an option, press
Options
until the indicator for the
desired option
fl
ashes, then press
Select
. If an option is not
available for a cycle, the indicator will not light. Follow the
same steps to delete an option.
Occasionally, a setting and option in the same cycle will
con
fl
ict with each other, like
No Spin
(or
Low Spin
) and
Save Energy
. When this happens, the energy saver option
will override any incompatible selections.
The options selected for the cycle will be remembered and
recalled each time that cycle is selected in the future. To re-
turn to factory settings, press the
START/PAUSE
and
Select
buttons at the same time and hold until the signal sounds.
Chime
A signal will sound at the end of the cycle if this option
is selected. The signal has an adjustable volume level or
can be turned o
ff
.
Stain Boost
Use the
Stain Boost
option to add a 5-minute soak in the
middle of the wash portion of select cycles.
Save Energy
The
Save Energy
option defaults to a cold temperature
setting (in most cycles) and also extracts more water to
reduce drying time.
Extra Rinse
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended for
heavily soiled loads or if household members have sensi-
tive skin.
NOTE
To change the options after the cycle starts, press
PAUSE
,
adjust the options and press
START
to resume the cycle.
Summary of Contents for 417.4112 Series
Page 25: ......
