Kenmore 146.22126910, Use & Care Manual

Page: 20 / 66

20
Right side
panel
magnets are at top
Door Magnet Box
Cart support
Angle bar
Cart support
Angle bar
2
Cart
□
To attach side panels, align side panel holes with screw insert holes on each side of Bottom shelf.
□
Attach but do not fully tighten left and right side panels to bottom shelf with (6) M6x13 screws. (A)
Leave a small gap beneath the screw heads for easier attachment of panels, brackets and bars in the following
steps on this page.
Note: Install the right side panel (with square hole) on the side of bottom shelf nearest the tank hole.
□
Attach the Back Panel to Bottom Shelf and two side panels with (9) M4x10 screws. (B)
□
Attach the Tank Baffle to Back Panel and Bottom Shelf with (4) M4x10 screws. (B)
□
Align Door Bracket holes with holes on side panels. Attach Door Bracket to side panels with (4) M4x10 screws.
(C)(D) Note: Attach bracket as shown so that magnets are at top.
□
Attach the Door Magnet Box with (2) M4x10 screws to the Bottom Shelf. (E)
□
Align the holes in the Cart support angle bars with holes on bottom shelf and side panels. Attach the Cart Support
Angle Bars with (8) M4x10 screws. (E) (F)
Now fully tighten the 6 screws attaching the side panels to the bottom shelf.
M6 x13 Screw
Qty: 6pcs
M4 x10 Screw
Qty: 27pcs
A
B
C
D
E
F