24 / 59
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
7
8. Operation and Functions
1. How to start
1) Press “Ice maker” button 5 times while touch “Freezer” button at the same time.
2) The front F-LED(or C-LED) displays as the right diagram shows
( [Ex.] Time Display of 0003 signifies 3 minutes of power on time.)
3) Press “Freezer Set” button and the following value is displayed successively.
①
Operating Time
②
F-Sensor temperature
③
R-Sensor temperature
④
FD-Sensor temperature
⑤
RD-Sensor temperature
⑥
IM-Sensor temperature
⑦
RT-Sensor temperature
⑧
Water amount control
4) Error is displayed only if there is any ; it is skipped if no error.
2. How to stop
1) Touch “Alarm” button 1 time.
2) It stops automatically in 4 minutes from the start.
3. All the error codes are reset if they turn to be normal.
4. Error code
INPUT
CONTROL OBJECT
CONTENTS
REMARKS
Temperature Control Buttons
88 Display CLED
ERROR CODE
CONTENTS
F1
F-
sensor : disconnection (“Lo”), short (“Hi”)
r1
R-
sensor : disconnection (“Lo”), short (“Hi”)
i5
IM-
sensor : disconnection (“Lo”), short (“Hi”)
Fd
FD-
sensor : disconnection (“Lo”), short (“Hi”)
rd
RD-
sensor : disconnection (“Lo”), short (“Hi”)
rt
RT-
sensor : disconnection (“Lo”), short (“Hi”)
dr
R-Door Switch : defective
dF
F-Door Switch : defective
C1
Cycle : abnormal or defective
F3
Return after defrosting : abnormal or defective(FD-S)
r3
Return after defrosting : abnormal or defective(RD-S)
d2
Display forced defrost mode for A/S
CO
Pulldown
Er CE
Communication error between MPCB - FCP
8-11. Error Display
