18
19
Door Handle Reversal
1
Use the supplied hex wrench to loosen
the set screw at the handle lower end.
2
Slide handle down and remove from
door.
3
Unscrew and remove the handle
attachment bolts from the door. Remove
the bolt hole plugs on the other side of
the door. Insert and tighten the bolts into
the holes. Insert the plugs into the holes
exposed by removal of bolts.
4
The handle end labeled R contains a
keyhole fixture. Insert the wide part
of the keyhole over the top bolt and
slide handle up. The handle lower end
containing the hole labeled Fixture A will
enclose over the bottom bolt.
Using the supplied hex wrench, tighten
the set screw in the handle lower end to
securely attach the handle to the door.
NOTE
If you prefer the set screw to face away
from rather than in toward the door
surface, invert the handle so that the
keyhole fixture (labeled R) is placed over
the bottom bolt. Slide the handle down.
The handle upper end containing the hole
labeled Fixture A will enclose over the top
bolt. Use hex wrench to tighten set screw in
handle upper end.
