12
11.
Touch and hold START/PAUSE/Unlock Lid
button to begin wash cycle
Press and hold the START/PAUSE/Unlock Lid button to start
the wash cycle. When the cycle has finished, the end of
cycle signal will sound (if set). Promptly remove items when
cycle is done to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE/Unlock Lid button to pause washer; the
lid will unlock once the washer movement has stopped.
This may take several minutes if the load was spinning
at a high speed. Then close lid and press and hold the
START/PAUSE/Unlock Lid button again to restart the cycle.
IMPORTANT:
If lid is left open for more than 10 minutes
the water will pump out and F8E6 error code will appear
on the display.
Select any other cycle options you may wish to add, if
not previously set. Some cycles will automatically add
certain options such as Two Rinses. These may be
turned off, if desired.
NOTE:
Not all options are available with all cycles. Touch control
panel to select any other options.
10.
Select cycle options
