22
ACCESSORIES
Replacement Parts:
To order stainless steel cleaner or replacement filters, call
1
800
4
MY
HOME
®
and ask for the appropriate part number
listed below or contact your authorized Kenmore dealer.
Stainless Steel Cleaner and Polish:
Order Part #D22 M40083 R
Water Filter:
Order Part #9930 (P4RFKB2 or P4RFKB12)
Air Filter:
Order Part #W10335147A
Produce Preserver:
Order Part #W10335145A
WATER FILTER
CERTIFICATIONS
Water is leaking
or dripping
from the dispenser
NOTE: After dispensing, a few additional drops of water are normal.
■
Glass was not held under the dispenser long enough - Hold the glass under the dispenser for
2 to 3 seconds after releasing the dispenser pad/lever.
■
New installation, or water filter was recently installed or replaced - Air in the water lines causes the water
dispenser to drip. Flush the water system to remove the air in the water lines. See “Water and Ice
Dispensers.”
■
Residual ice in the dispenser chute is melting - Make sure the ice chute is free of ice shavings or pieces.
Water is leaking
from the
back of the
refrigerator
■
Water line connections are not fully tightened - Make sure all connections are firmly tightened. See
“Connect Water Supply.”
Water from the
dispenser is
not cool enough
(on some models)
NOTE: Water from the dispenser is chilled to 50°F (10°C).
■
New installation - Allow 24 hours after installation for the water supply to cool completely.
■
Recently dispensed a large amount of water - Allow 24 hours for the new water supply to cool
completely.
■
Water has not been recently dispensed - The first glass of water may not be cool. Discard the first glass
of water dispensed.
■
Refrigerator is not connected to a cold water pipe - Make sure the refrigerator is connected to a cold
water pipe. See “Water Supply Requirements.”
ICE AND WATER Possible Causes and/or Recommended Solutions
