Set contents
How to use
Part names
How to insert battery
Binoculars
Pouch
Strap
Cloth
Adjust the eyepoint properly and focus it to bring out the product's best performance. Viewing varies by physical
health, the surrounding environment, and weather, so please finely adjust every time before using.
3. Adjust interpupillary distance.
Hold the unit in both hands, slowly fold both eye cups such that they align with one's own
interpupillary distance. The optimal interpupillary distance is when the view seen from
both eyes appears to overlap on a circle as shown in the following diagram.
2. Adjust the eyepoint.
These Vibration Control binoculars use twist-up eye cups, so adjust them to a position
for easy sight before using.
Generally those looking with the naked eye or using contact lenses should turn the
twist-up eye cups counterclockwise to extend them. If you wear glasses, please use the
binoculars with the twist-up cups shortened.
1. Observe using binoculars.
Look through the eyepiece side.
* If you look through the objective lens side, the image appears smaller.
Always look through the eyepiece side.
Twist-up eye cups
Shorten
Extend
When using the Vibration Control function, first insert one new CR2 battery.
1. Raise the knob on the battery cover, and turn to remove. (Diagram 1)
2. Following the bottom surface diagram, insert one CR2 battery such that the plus side goes towards the battery cover
side. (Diagram 2)
3. Turn the battery cover to tighten.
* Remove the battery when not using for a long time.
* Keep the battery cover on even when the battery is removed. Do not let metal touch the contacts.
Open
Objective lens
Strap attachment section
Focus wheel
Twist-up eye cups
Dioptric power correction ring
Eyepiece
Battery cover
Vibration Control switch
ON/OFF
Tighten
Battery cover
Battery cover
CR2 battery
[Diagram 1]
[Diagram 2]
【
Side
】
Pilot lamp
Eye cups
4. Adjust the dioptric power and focus.
①
Choose a target such as a letter on a board.
②
First close the right eye, and turn the focus wheel until the object can be clearly seen
with just the left eye.
③
Next close the left eye, and turn the diopter correction ring until the object can be
clearly seen with just the right eye.
④
The difference in dioptric power on both sides is thus corrected, and the misadjusted
focus of both eyes is eliminated.
Afterwards you only need to turn the focus wheel to immediately adjust the focus.
* If you are using high-magnification Vibration Control binoculars, turn ON the Vibration
Control function when adjusting to more easily correct the focus.
Focus wheel
Dioptric power correction ring
Eye width does not align
Eye width aligns
Shaded
Vision
Eyepiece
Look through this side.
