Page | 7
Save This Manual for Future Reference
Electronic Specifications
CHARGER
•Power 175W.
•Standby power consumption 0.1W.
•Nominal output voltage: 29V DC ±10%.
•Plug type C7.
•Plug type: Mini fit 2
-pole.
•Thermal switch.
Usage:
•Storage and transport temperature: 14°f to 158°F (
-10°C to +70°C).
•Approved according to:
EN 60335-1.
EN 61588 and UL 1310.
BATTERY
:
•Rechargeable Li
-ion battery cell
•Battery alarm (audio) when charging is needed.
•Battery charging indicator (LED light bars) indicating the capacity level.
•Thermal switch
protection, overcurrent protection.
•Battery capacity: 2.15 Ah/ 52Wh
•Nominal voltage: 24V DC
•Discharge current 9A (max)
•Maximum charging voltage: 40V DC
•Charging current: 0.5A
Usage:
•Ambient temperature: 41°F to 104°F (5°C to 40°C).
•Storage temp
erature: 32°F to 113°F (0°C to 45°C).
•Approved according to:
EN 62133 (Battery safety testing)
UL 1642 (Lithium calls, standards test)
UN 36.3 (Transportation of Lithium batteries)
UL 2054 (Household and commercial batteries)
EN 60335-1 with CBH Advanced
BATTERY REMOVAL/ CHARGING
•Remove ESD mat from top work surface.
•Slide off and remove cover in center of work surface.
•Unplug battery.
•Depress tab at battery carrier end and slide batte
ry off.
•Charge battery with supplied charger only. When fully charged reinstall battery.
•Optional Charging: Battery can be charged while in the cart. AC hookup is located on the controller.
Cart operation is not recommended when charging with battery installed.
