DISCLAIMER:
Kendall Howard LLC. endeavors to make this manual accurate and complete. However, Kendall Howard LLC makes no representations or
warranties of any kind, expressed or implied, about whether the use of products contained herein would infringe any rights or the correctness, accuracy
or reliability of the information contained herein or that said information covers all details, conditions or variations. The information herein does not
provide for every possible contingency in connection with the installation or use of the product(s). The information contained in this document is subject
to change without notice or obligation. Kendall Howard LLC assumes no responsibility for the accuracy, completeness or reliability of the information
contained in this document. Any reliance placed on the information is therefore strictly at your own risk.
For details about product warranty, please visit
www.kendallhoward.com
Tools Required:
What’s in the box?
Philip’s Head Screw Driver
QTY 2: Rack Rail
QTY 2: H-Brace
QTY 4: Wall Rack Brackets
QTY 16: Cross Head Screw
QTY 24: 10-32
Rack Screw
QTY 24: 10-32
Cage Nut
Step 1:
Step 2:
Step 3:
Step 4:
Cage Nut
Tapped
Wall mount hardware
not included.