7
9. ATTACHING THE FAN
BLADES
Figure 13
Figure 14
Blade screws
Blade screws
Blade
Fan motor
assembly
Fan motor
assembly
Step 1. Remove the nine blade screws from
the fan motor assembly. (Fig. 13)
Step 2. Attach the blade to the fan motor
assembly using three blade screws. Attach
the other blades to the fan motor assembly.
(Fig. 14)
10. ATTACHING THE LED
LIGHT KIT
NOTE:
Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
Figure 15
LED light kit
Step 1. While holding the LED light kit under your
fan, firmly snap the wire connection plugs
together.
Step 2. Attach the LED light kit to the switch box
by twisting left tightly.
Note: This is an integrated LED light kit assembly
and should not be disassembled to prevent
electric shock.
Wire connectors
Switch box
