Kendal Lighting AC-21454, Installation And Operation Manual

Page: 5 / 10

1. Remove 1 of 3 screws on fan adapter and loosen
the other 2 screws.(see fig.12)
2. Attach the light kit adapter to fan adapter by
placing key slots over the 2 loosened screws, turn
the light kit adapter until it get the narrow end of
key slots and have the round hole align with the
round hole on fan adapter. (see fig.13) Tighten the
screws. (see fig.14)
3
.
Remove 1 of 3 screws on light kit adapter and
loosen the other 2 screws.(see fig.15)
4
.
Connect the plug between the fan wire with light
kit wire and lift the light kit plate upto light kit
adapter, have the key key slots over the two loosened
screws. Turn the light kit plate until it get the narrow
end of key slots. (see fig.16)Tighten screws. (see
fig.17)
5
.
Assemble the glass and glass holder.(see fig.18)
6
.
Turn the glass assembly to install onto light kit
plate. (see fig.19)
7. If you do not need the light kit, you can also install
the decorative cap directly onto the flywheel. Skip
fig.11 to fig.19. Align the 3 slots with 3 ribs, and lift
the decorative cap onto flywheel and tighten the 3
long screws. (see fig.20 and fig.21)
SCREW
SCREW
SCREW
LIGHT KIT
ADAPTER
LIGHT KIT
ADAPTER
PIN PLUG
LIGHT KIT
SCREW
LIGHT KIT
SCREW
GLASS
GLASS HOLDER
LIGHT KIT
GLASS
FLYWHEEL
DECORATIVE CAP
BOLT
CLIP
SCREW
DECORATIVE CAP DECORATIVE
CAP
FIG.14
FIG.15
FIG.16
FIG.17
FIG.18
FIG.19
FIG.20
FIG.21