7
10. ATTACHING THE
MOUNTING PLATE
1. Remove 1 of 3 screws from the mounting
ring and loosen the other 2 screws. (Do not
remove)
2. Place the key holes on mounting plate over
the 2 screws previously loosened from the
mounting ring, turn mounting plate until it locks
in place at the narrow section of the key holes.
Secure by tightening the 2 screws previously
loosened and the one previously removed.
Figure 15
9. ATTACHING THE FAN
BLADES
Fasten blade assembly to motor using the flat
washers and screws supplied. (Fig. 14)
CAUTION:
Make sure all screws are
tightened securely.
Figure 14
Screws
Flat washers
Blade
Screws
Mounting ring
Mounting plate
