www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
1
INSTALLATION INSTRUCTIONS
MAC_F-1785_090418
Luminaires for Patient Room Applications
MEDMASTER
™
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE
APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH
THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED. DISCONNECT POWER TO ALL CIRCUITS
BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE WITH
ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT CONNECT
TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE MARKINGS
AND LABELS TO ENSURE CORRECT INSTALLATION OF FIXTURE.
SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED ON THE
FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET, REGARDING
ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
MAC SERIES
Install in compliance with the National Electric Code, any applicable local codes and any specific instructions given
on the luminaire labels. If installing in conjunction with any additional options and/or accessories, also refer to the
respective instruction sheets. For installation only by a qualified electrician.
NOTE: To maintain the ratings and approvals noted on the fixture nameplate, any fittings or mounting hardware
supplied with this fixture, must be used with this fixture.
SURFACE MOUNTED FIXTURES
1. Use mounting hardware (if provided) to secure the fixture to its location. If no hardware is supplied, any
appropriate hardware can be used.
2. Fixtures with external mounting tabs must be mounted using all tabs.
