www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
3
INSTALLATION INSTRUCTIONS
LTSI-A1_F-7321_103018
To Replace LED Modules:
LED module replacement may be done after the fixture is removed from service.
The heat sinks and optics must also to be replaced when replacing the LED modules.
1. Rotate latches and open door, which is retained by stainless steel cables.
2. Remove reflectors.
3. Loosen the nuts retaining the LED module assemblies.
4. Replace the LED module assembly by reversing steps 1-4 above.
NOTE: Torque lock nuts at 30 inch pounds.
Figure 4
For technical assistance, call 1-800-4KENALL (1-800-453-6255).
CUSTOMER SERVICE
WARRANTY
For warranty information visit www.kenall.com/Resources/Certified-Performance-Warranties
