EN
1.
INTRODUCTION
1.1 General
Congratulations on choosing the Kemppi HF wire feeder. Used correctly, Kemppi products
can significantly increase the productivity of your welding, and provide years of economical
service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specifications of the device can be found at the end of the
manual.
Please read the manual carefully before using the equipment for the first time. For your
own safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.
NOTE!
Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with this symbol. Read these sections carefully and follow their
instructions.
Disclaimer
While every effort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
1.2 About HF wire feeder
Kemppi’s HF wire feeder in designed to be used especially with Kemppi’s HiArc power sources.
They are inverter MIG/MAG welding power sources to be used in 3-phase mains power
supply. There are two power classes available, the 350-ampere version (HiArc 350A), and the
500-ampere version (HiArc 500A).
The HiArc power sources are equipped with automatic adjustment features. This means that
you can use either manual mode or automatic mode when adjusting the welding parameters.
In automatic mode, the HiArc chooses automatically the suitable preset welding parameters
according to your wire and gas selections.
Welding gun connection:
• HF 10E is equipped with a Euro connector
• HF 10P is equipped with a Panasonic connector
Enjoy welding with your Kemppi product!
3
© Kemppi Oy / 1217
Summary of Contents for 6300110
Page 1: ...Operating manual EN ZH HF 10E 10P...
Page 2: ......
Page 3: ...OPERATING MANUAL English...
