9 / 12 – K410098106001-00 / 07.2017 –
©
www.kemper-olpe.de
1.1
DUO shut-off/water meter box
1.2
Mounting possibilities | Mounting accessories
The ´DUO´ shut-off/water meter box is intended for use in pre-wall and dry
construction systems. It is supplied completely pre-assembled. Because of its
diverse mounting possibilities it is suitable for all current pre-wall systems.
The water meter box comes with a protective cover, which protects the inside
of the water meter box from dirt accumulation and contamination during
the carcassing phase.
In the as-delivered condition the shutoff valves are completely
closed. Prior to initial operation, the water meter shutoff unit
must be set to the off position.
Please ensure that only filtered water is used before flushing the
water meter section, so as to avoid any contamination or dirt
accumulation in the housings and seal elements.
Möglichkeiten zur Befestigung des WZ-Kastens an Vorwandprofile:
A |
by means of optionally available KEMPER angle brackets, Figure
870 00 002, incl. screws, washers and nuts, in prefabricated
support members. These can be joined to one another using
hammer-head bolts, slot-block fasteners or sheetmetal screws
(25 mm depth adjustment possible).
B |
by means of tapping screws in the edge facing and vertical
frame elements.
C |
by means of mounting rail (e.g. Leifeld) and mounting screws.
D |
by means of pliable brackets for mounting on the vertical frame
elements or diaphragm wall..
1
Installation
8.5 Ø for hammer-head or slot block
fasteners in the mounting rail system
5.5 Ø for sheet-metal screw connection
in a dry construction system
25 Tiefenverstellung = 25 mm depth
adjustment
