- 9 -
7.2.10. Assign device settings for –SLAVE- (as described in –MASTER- Item 3-6)
7.2.11. After completing the network and device settings, write the configuration to the control
At this point, remove all components installed in the KHS Flush System (flush valves, MASTER-SLAVE, sensors). Transfer the
data into the MASTER control only subsequently, as described in 12.
7.2.12. Note: Confirm overwrite control data with OK
7.2.13. Testing the network and device settings/error messages
Antenna symbol and symbols for the set devices appear permanently on the display of the MASTER- control in the overview,
LED’s permanently lit green (everything OK) on all devices.
For error messages, please refer to Troubleshooting table