Owner’s manual
EN
8
Parts description
1. Front guard
2. Blade screw (left spin)
3. Blade
4. Rear guard screw
5. Rear guard
6. Speed buttons
7. Fan axle
8. Motor housing
9. Oscillating button
10. Stand
11. Power supply cable
12. Base
Mounting
1.
Fit the stand into the base, then use the supplied screws to fix them.
2. Place the rear guard on pillars on the motor housing and fasten it with guard
mounting nut. Make sure the rear guard is closely mounted to the motor housing.
3.
Place the blade on the fan axle and fasten the spinner to affix the blade.
4. Put the hook of the front guard ring on the top of the rear net. Put the rear net
into the front guard ring to make them tally completely. Tighten the fastening
screw at the lower end of front guard.
