KEMKRAFT
ENGINEERING, INC.
MODEL KEI-850 READOUT BOX
96-033.doc
1
47650 Clipper Dr. Plymouth Twp., MICHIGAN 48170 (734)-414-6500
INSTRUCTION MANUAL
CLEAR VISION DUAL INCLINOMETER BOX
MODEL # KEI-850
REVISION DATE:
26-MAR-98
Page 1: ...FT ENGINEERING INC MODEL KEI 850 READOUT BOX 96 033 doc 1 47650 Clipper Dr Plymouth Twp MICHIGAN 48170 734 414 6500 INSTRUCTION MANUAL CLEAR VISION DUAL INCLINOMETER BOX MODEL KEI 850 REVISION DATE 26 MAR 98 ...
Page 2: ... of the enclosure This power switch also doubles as a circuit breaker for the KEI 850 Display box Should the breaker ever trip the power switch only needs to be turned to the off position and back on to reset the breaker 2 After the power has been applied to the KEI 850 Display box the LCD display will have this display 4 If power is applied and the KEI 850 Display box has the LCD has the followin...
Page 3: ...ad Press CAL switch again to calibrate If a calibration procedure is to be performed press the CAL switch a second time and the program will go into the cal procedure If the cal procedure is not desired a countdown timer will countdown for 15 seconds and the program will go back to the RUN MODE The red LED should turn off and the green LED should turn back on D If calibration is desired press the ...
Page 4: ...sion Tool is used the limit switch on the tool closes and dumps the angle of the tool out of the serial port in Hexadecimal SERIAL PORT PROTOCOL N 8 1 4800 BAUD DUMP STRING 02 x x x 03 xx 02 start of text xx most significant byte xx middle xx least 03 end of text xx check sum BURKE E PORTER FORI INTERFACE The connector is set up for three wire RS 232 interface ground transmit and receive The inter...
