·
As shown in pictures, W / L is DC 12V power.
·
As shown in pictures, connect the Positive Pole and the Negative Pole respectively of two speakers (R to R), (B to B).
+
-
BATTERY
12V
+
-
WIRE DIAGRAM
BLUETOOTH OPERATION
1
2
3
W
(white)
W
W
(white)
L
(blue)
L
(blue)
R
(red)
connect
connect
connect
connect
R
(red)
B
(black)
B
(black)
2 of 3
B0117-00101BK
L
R
B
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
1) Power on the speaker, a tone will be heard, signalling that the speaker is now ready for Bluetooth pairing. The speaker is now
ready for Bluetooth pairing.
2) The speaker is now in pairing mode:
ANDROID users:
a. Go into the Settings Menu of your device.
b. Enter the Bluetooth Menu.
c. TURN ON Bluetooth and press SCAN.
d. “KEMIMOTO” will now be displayed under available devices.
e. If prompted, enter passcode: “0000”.
iOS users:
a. Go into the Settings Menu of your iOS device.
b. Enter the Bluetooth Menu.
c. TURN ON Bluetooth.
d. “KEMIMOTO” will now be displayed.
e. If prompted, enter passcode: “0000”.
3) If KEMIMOTO is not seen, repeat the above steps to refresh the “Device List”.
4) When the connection is successful a tone will be heard.
Note:
·
Using this product without running the engine can drain the battery.
·
To avoid battery exhaustion, be sure to occasionally run the vehicles engine while using this product.
