Kemar KSM-800, Instruction Manual

Page: 44 / 56

how to use the “S” blade of the Food Processor 1250ml
(optional accessory, not included with delivery)
Chopper is perfectly suited for hard food, such as chopping meat,
cheese, onion, herbs, garlic, carrots, walnuts, almonds, prunes etc.
Don’t chop extremely hard food, such as ice cubes, nutmeg, coffee be-
ans and grains.
Before chopping…
1. Carefully place the blade onto the central spindle in the bowl, hol-
ding it by the plastic part. Caution: the blade is very sharp! Always
hold it by the upper plastic part.
2. Put the foodstuffs into the bowl never fill the bowl above the maxi-
mum limit indicated.
1. Place the blade on the center pin of the chopper bowl. Press down
the blade and lock bowl. Always place the chopper bowl on the anti-
slip base. Operation of the direction , please see the figure as show.
2. Place the food in the chopper bowl.
3. Place the chopping bowl lid on the chopper bowl.
4. Turn the motor unit on the chopping bowl lid until it locks.
5. Choose switch II to operate the chopper. During processing, hold the
motor unit with on hand and the chopper bowl the other.
6. After use, turn the motor unit off the chopping bowl lid.
7. Then remove the chopping bowl lid. Carefully take out the blade.
8. Don’t operate hard food for no longer than 10 seconds.