10
Programming
Version: FAU_M_EN_170308_E004
3.1.2.
Unit for Flow Rates
To display measuring results in the corresponding unit, chose from pre-selections for volumetric and mass units.
In the measuring mode, the unit is only displayed with volume and mass flow.
pre-selection: litres per minute
Use to go through the pre-selections.
Totals
Rate
kg
l/min
Grams
kg/m
Litres
ccm/m
ccm
g/min
Imp
l/h
Gal.
kg/h
lb
ccm/s
g/s
Gal/m
lb/m
As soon as the desired unit appears, confirm with . After that the next parameter appears.
3.1.3.
Decimal Point Position for the Flow Rate Display (DP Flow Display)
You should display your measuring results with a resolution in accordance with your application. Max. three
digits after the decimal point are possible.
NOTE:
Changing the decimal point position will also affect the limits. The FAU will remind you of checking the limits and
adapting them to the present decimal point position.
Example: three digits after the decimal point are required.
Enter with , after that the next parameter appears.
