Kelvinator KSV26CRE User Manual Download Page 3

warning

 

Do not use means to accelerate the defrosting 
process or to clean, other than those recommended 
by the manufacturer.

Do not store the appliance in a room with continuously 
operating ignition sources (for example open flames, 
an operating electric heater or an operating gas 
appliance with a continuously lit pilot flame).

 

Do not pierce or burn.

Be aware that the refrigerant may be odourless.

Ensure the unit is properly connected to the power.

Excess heat generation caused by incorrect 
connection may result in an electric shock or fire.

 

Do not operate or stop the unit by switching on or 
off at the power source.

This may cause an electric shock or fire due to excess  
heat generation.

Do not damage or use an unspecified power cord.

This may cause an electric shock or fire.

Do not modify power cord length or share the outlet 
with other appliances.

This may cause an electric shock or fire due to excess  
heat generation.

Do not operate with wet hands or in damp environment.

This may cause an electric shock.

Do not direct airflow at room occupants only.

This could damage your health.

Always ensure that the unit is correctly earthed.

No earthing may cause electric shock.

Do not allow water to run into electric parts.

It may cause failure of the unit or electric shock.

Always install circuit breaker and a dedicated
power circuit.

Improper installation may cause fire and electric shock.

Disconnect the power if strange sounds, smells, 
or smoke come from the unit.

It may cause fire and electric shock.

 

Do not drink water drained from air conditioner.

It contains contaminants and could make you sick.

 

Do not open the unit during operation.

It may cause electric shock.

Use correctly rated circuit breaker or fuse.

There is risk of fire or electric shock.

 

Do not use the power cord close to heating appliances.

It may cause fire and electric shock.

 

Do not use the power cord near flammable gas or 
combustibles, such as gasoline, benzene, thinner, etc.

It may cause an explosion or fire.

Ventilate room before operating air conditioner if 
there is a gas leakage from another appliance.

It may cause explosion, fire and burns.

Do not disassemble or modify unit.

It may cause failure and electric shock.

Safety instructions

Kelvinator Air Conditioning  

Important safety instructions  3

•   Contact an authorised installer for installation of this unit.
•   Contact an authorised service technician for repair or 

maintenance of this unit.

•   The socket outlet required to supply power must be 

connected and commissioned by a licensed contractor.

•   This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person 
responsible for their safety.

•   Young children should be supervised to ensure that they 

do not play with the air conditioner.

•   If the power cord is to be replaced, replacement work 

shall be performed by authorised personnel only.

•   Installation work must be performed in accordance with 

the national wiring standards and the electricity suppliers 
service rules by authorised personnel only.

•   If the system is to be moved to another location or 

disposed of, only a suitably qualified person is permitted 
to undertake such work.

•   Take care not to catch fingers on the fan blade when 

adjusting vertical louvres.

•   This air conditioner uses R32 refrigerant.

How to properly use and maintain your air conditioner

Just a little preventative care on your part can save you 
a great deal of time and money over the life of your air 
conditioner. You'll find many answers to common problems 
in the chart of troubleshooting tips. If you review the chart 
of Troubleshooting Tips first, you may not need to call 
for service.

Meanings of symbols used in this manual are shown below:

warning

This symbol indicates information concerning your  
personal safety

caution

This symbol indicates information on how to avoid 
damaging the appliance

tips and information

This symbol indicates tips and information about  
use of the appliance

environmental tip 

This symbol indicates tips and information about 
economical and ecological use of the appliance

 

This symbol indicates always do this

 

This symbol indicates never to do this

Summary of Contents for KSV26CRE

























Reviews: