Kelvinator KSV26CRC Installation Manual Download Page 2

2  Contents  

Kelvinator Air Conditioning

Congratulations and thank you for choosing our Inverter Split 
room air conditioner. We are sure you will find  
your new air conditioner a pleasure to use. Before you use 
the air conditioner, we recommend that you read through  
the entire user manual, which provides the description of  
the air conditioner and its functions.
To avoid the risks that are always present when you use an 
electrical appliance, it is important that the air conditioner  
is installed correctly and that you read the safety instructions 
carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet  
for future reference and pass it on to any future owners.
After unpacking the air conditioner please check it is not 
damaged. If in doubt, do not use the air conditioner but  
contact your local Electrolux Customer Care Centre.

environmental tip 

Information on disposal for users

•    Most of the packing materials are recyclable.  

Please dispose of those materials through your local 
recycling depot or by placing them in appropriate 
collection containers.

•    If you wish to discard this air conditioner, please contact 

your local authorities and ask for the correct method  
of disposal.

caution

•    The air conditioner is not intended for use by young 

children or infirmed persons without supervision.

•    Young children should be supervised to ensure that 

they do not play with the air conditioner. 

•    Contact an authorised installer for installation of this unit.
•    Contact an authorised service technician for repair or 

maintenance of this unit.

•    If the power cord is to be replaced, replacement work  

shall be performed by authorised personnel only.

•    Installation work must be performed in accordance  

with the national wiring Standards by authorised 
personnel only.

Conditions of use

This appliance is intended to be used in household and 
similar applications such as:

•    

Staff kitchen areas in shops, offices and other working 
environments

•  

Farm houses

•    

By clients in hotels, motels, and other residential 
type environments

•  

Bed and breakfast type environments

Contents  ............................................................................ 2

Important safety instructions ........................................... 3

Notice for installation ....................................................... 3

Installation ......................................................................... 4

Installation drawing .......................................................... 5

Installation of indoor unit ................................................. 6

Refrigerant pipe connection  ............................................. 8 

Installation of outdoor unit ............................................... 9

Check after installation and operation test .................... 10

Installation and maintenance of HEPA filter ................... 10

Warranty .......................................................................... 11

Congratulations

Contents

Summary of Contents for KSV26CRC













Reviews: