3
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
The manufacturer will decline all responsibility if the governing health and safety laws are not
adhered to, which permit safe and correct use of the hood and electrical connections.
ATTENTION:
If the light does not work, check to see if the light bulb is in correctly.
MOUNTING OF THE HOOD ON THE WALL
•
Drill 4 holes of
Φ
6 on the wall, which correspond to the position (B-Z) of the Fig. 1.
•
Hang the hood on the 2 holes by using the screws with expanding plugs, which are
appropriate for walls of concrete, plasterboard etc.
•
Fix definitely the hood through the 2 security holes.
•
Air that is used for exhausting fumes from appliances burning gas or other fuels,
must not be discharged into a flue.
•
The minimum distance between the supporting surface for the cooking vessels
(pots) on the
hob and the lowest part of the cooker hood must be at least 65 cm.
Regulations concerning the discharge of air have to be adhered to.
CHANGING FROM EXHAUSTING TO FILTERING
（
Fig. 1
，
2
，
3
，
4
）
At first remove the metallic filter (G) and turn the small lever (L) from the position (A) to
the position (F), then fix the charcoal filter, lastly replace the metallic filter (G). Now the
hood is ready for the filtering function.
USE AND MAITENANCE
·
It is recommended to operate the appliance prior to cooking.
·
It is recommended to leave the appliance in operation for 15 minutes after cooking
is terminated in order to completely eliminate cooking vapors and odours.
Summary of Contents for KH61SS
Page 5: ...5 ...
