Kelvinator KGC20BL Series, User Manual

Page: 3 / 16

This User Manual has been prepared for owners and users
of the hot water system. Please keep it in a safe place for
future reference.
Inside you will find many helpful hints on how to use and
maintain your hot water system properly.
Just a little preventative care on your part can save you a
great deal of time and money over the life of your hot water
system. You'll find many answers to common problems
in the chart of troubleshooting tips. If you review the chart
of troubleshooting tips first, you may not need to call
for service.
For the installer
The installation must be completed in accordance with the
information supplied in the Installation Manual that comes
with your gas continuous flow hot water system.
All other relevant National, State or Local regulations must
also be conformed with and these include (but are not
limited to):
• Australian Standard AS3500.1 – Water Supply
• Australian Standard AS3500.4 – Hot Water Supply
• Australian Standard AS3000 – Electrical Installation
• Australian Gas Association Code AS5601 –
Gas Appliance Installation
• Local Water, Gas & Electrical Authority Regulations
Municipal Building Codes
warning
Installation must be performed by a qualified installer (for
example, a licensed plumber or gas fitter).
This symbol indicates never to do this
This symbol indicates always do this
warning
Connect with power properly.
Otherwise, it may cause electric shock or fire due to
excess heat generation.
Always ensure effective earthing.
No earthing may cause electric shock.
Disconnect the power and turn off the gas inlet valve
to the hot water system if strange sounds, smell, or
smoke comes from it.
It may cause fire and electric shock.
Do not operate or stop the water heater by switching
on or off the power.
It may cause electric shock or fire due to heat generation.
Do not damage or use an unspecified power cord.
It may cause electric shock or fire.
If the power cord is damaged, it must be replaced by
the manufacturer, an authorised service centre or a
similarly qualified person in order to avoid a hazard.
Do not modify power cord length or share the outlet
with other appliances.
It may cause electric shock or fire due to heat generation.
Do not operate with wet hands or in a damp
environment.
It may cause electric shock.
Do not allow water to run into electric parts.
It may cause failure of machine or electric shock.
Do not use the socket if it is loose or damaged.
It may cause fire and electric shock.
Do not open the water heater during operation.
It may cause electric shock.
Do not allow the power cord to rest close to hot
surfaces.
It may cause fire and electric shock.
Do not disassemble or modify water heater.
It may cause failure and electric shock.
Important
Kelvinator gas continuous flow hot water system important 3