8
CARRIER ADJUSTMENT
CHILD’S COCKPIT ADJUSTMENT
CONTINUED
Figure 4
TOP VIEW OF CARRIER
A
B
C
B.
Unbuckle both clips on the yellow 5-Point Harness
(Fig. 4, A
.)
C.
Adjust the cockpit seat height by attaching the snap-hook to the
desired steel ring at the front of cockpit
(Fig. 4, B)
. There are three
steel rings for seat height adjustment. To raise the seat height,
attach to an upper seat ring. To lower, attach to a lower ring.
D.
With kickstand fully deployed and the carrier still on the floor or
firm, level ground, place child into cockpit. Make sure both legs go
through leg openings
(Fig. 4, C)
. Slip child’s arms under shoulder
straps
(Fig. 4, D)
.
E.
Clip shoulder straps into the yellow 5-Point Harness
(Fig. 4, A)
.
D
E
TIPS
7
CARRIER ADJUSTMENT
CHILD’S COCKPIT ADJUSTMENT
Before starting, make sure the yellow 5-Point
Harness is completely buckled and the leg
straps (Fig. 3, A), located on the back of the
cockpit, are fully loosened.
A.
Place carrier on the floor or ground. Stand
behind the carrier with your foot on the bottom
of the frame to stabilize the carrier. Locate
the Quick-Release webbing mechanism behind
and under the cockpit
(Fig. 3, B).
Pull up and
out on the small piece of yellow webbing
(
Fig. 3, C
) while pulling up on the harness.
HINT: It is easiest to loosen harness by
threading your forearm through the
padded harness and pulling up.
Figure 3
BACK VIEW OF CARRIER
NOTE:
Remember to
read all safety
information prior
to using your
Kelty Carrier.
Proper fit and
adjustment will
make using your
carrier more
enjoyable for you
and your child.
A
B
C