NOTE:
The hook and
loop tabs alone
are NOT enough
to hold the child
in the pouch-you
must ALWAYS
fasten all of the
side-release
buckles.
TIPS
6
CHILD FACING IN
SECURING CHILD
IN THE POUCH
Figure 3
CHILD’S POUCH
H. Fasten the seat side-release strap buckles
(Fig. 3). Make sure both buckles are properly
engaged.
NOTE: The seat side straps should be adjusted
to provide a snug fit around child. Check
proper fit by inserting several fingers between
the pouch and child’s chest and the pouch
and each leg.
5
CHILD FACING IN
SECURING CHILD
IN THE POUCH
Before starting, make sure all of the buckles and hook and loop material
are NOT fastened.
D. Place pouch (KELTY logo side down) on a flat surface (Fig. 2D). If
required, remove cargo pocket to allow pouch to lay flat.
E. Lay child on the pouch, with the child’s head on the padded support
(Fig. 2E).
F. Lift the seat portion of pouch up between child’s legs (Fig. 2F), similar
to diapering.
G. Wrap both end tabs around the child’s legs, and fasten the loop
material to the hook material on the back of the pouch (Fig. 2G).
2D
2E
2F
2G
Figure 2
CHILD’S POUCH
