8
CARRIER ADJUSTMENT
CHILD’S COCKPIT ADJUSTMENT
CONTINUED
Figure 4
TOP VIEW OF CARRIER
A
B
A.
Place the carrier on the floor, or firm, level ground.
B.
Make sure the side-release buckles attached to the silver webbing on the
child’s shoulder harness are unbuckled
(Fig. 4, A)
.
C.
Adjust the cockpit seat height by attaching the two snap-hooks to the
desired steel rings at the front of cockpit
(Fig. 4, B)
. There are three
sets of steel rings for seat height adjustment. To raise the seat height,
attach to the upper seat rings. To lower, attach to the lower rings.
TIPS
7
CARRIER ADJUSTMENT
CHILD’S COCKPIT ADJUSTMENT
Before starting, make sure the Child’s
Shoulder Harness (Fig. 3, A) is unbuckled
and the leg straps (Fig. 3, B), located on the
back of the cockpit, are fully loosened.
Figure 3, A
CARRIER COCKPIT
NOTE:
DO read all safety
information prior
to using your
Kelty Carrier.
Proper fit and
adjustment will
make using your
carrier more
enjoyable for you
and your child.
Figure 3, B
BACK OF CARRIER
