Wall-mounting
1. Drill the required holes in the wall using the positioning screw holes.
2. Attach the bracket to to the wall with the screws.
3. Mount the heater to the bracket and engage the corresponding slots on the
rear of the heater.
Removing the heater from the bracket
1. Press and loosen all clips.
2. Pull the heater to disengage the clips of the bracket.
INSTALLATION INSTRUCTIONS
Tools required:
1. Electric drill
2. Cross-head screwdriver
3. Tape measure
Do not install the heater closer than 6in (152mm) to a vertical/horizontal surface.
This minimum distance must be maintained.
COUTION:
High temperature, Keep Electrical Cords,Drapes, and other
furnishings away from heater.
1) Read all instructions before using this heater.
2) Toreduce the risk of fire,do not store or use gasoline or other flammable
vapors and liquids in the vicinity of the heater.
3) Do not install the baseboard heater against combustible, low-density cellulose
surface.
4) This heater is not intended for use below window or close to window or door.
5) Do not insert or allow foreign objects to enteny ventilation or exhaust opening
as this may cause an electirc shock or fire, or damage the heater.
6) To prevent possible fire, do not block air intakes or exhaust in any manner, Do
not use on soft surface,like a bed, where opening may become blocked.
7) Keep furniture, drapes and carpets at least 3”(7.5mm) away from the front of
the heater
9
6in (15.2cm)
6in (15.2cm)
6in (15.2cm)
15.2cm
1
2
a
b
