Kelon Inverter Multi-Split Type Room Air..., Use And Care Manual

Page: 79 / 80

Please read this manual before installing and using it.
Only the air conditioner can be connected to the power line.
Refer to the rating plate of the equipment for power consumption details.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
similarly qualified person in order to avoid a hazard.
In order to ensure the suitability of the equipment for connection, the user should consult with the
supply authority, if necessary, that the service current capacity at the interface point is sufficient
for the equipment.
The power connection for the air conditioner has to be done at the main power distribution which has
to be of a low impedance.
Do not let air enter the refrigeration system or discharge refrigerant when moving the air conditioner.
Testing run the air conditioner after finishing installation, and record details of operation.
Type of fuse used on indoor unit controller is 50T, with rating 3.15A,AC250V. .
The fuse for the whole unit is to be provided by the user according to the current at maximum power
Input or use other over-current protective device instead.
37
Installation instructions
Notes
When charging refrigerant into the system, make sure to charge in liquid state, refrigerant of
the appliance is R410A.Otherwise, chemical composition of refrigerant inside the system
may change and thus affect performance of the the air conditioner.
According to the character of refrigerant (R410A), the pressure of the tube is very high, so be sure to
careful when you install and repair the appliance.
This appliance is not intended for use by persons(including children) with reduced physical,
sensory or mental capabilities,or lack of experience and knowledge,unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.