Kelon Inverter Multi-Split Type Room Air Conditioner, Use And Care Manual

Page: 52 / 80

Each time MODE button is pressed, the operation mode
is changed in sequence:
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
18 ~32 ℃ ℃
Heating mode is NOT available for cooling only air conditioner.
HEATING COOLING DRY FAN ONLY
Selecting mode
FAN mode
Auto High Medium
Low
At "FAN ONLY" mode, only "High","Medium" and "Low" are available.
At "DRY" mode, Fan speed is set at "Low" automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press once to temperature setting by 1 lower ℃
Press once to temperature setting by 1 raise ℃
Range of available set temperature
*HEATING, COOLING
Turning on
SWING, SMART, TIMER ON, TIMER OFF, CLOCK, SLEEP and SUPER operation modes will be
specified in the following pages.
Press button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
During heating operation, air flow is not discharged at the beginning. After 2 － 5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
Operation instructions
10
Operation modes
Note: Heating mode is NOT available for cooling only models.
MODE CLOCK TIMER ON TIMER OFF
DIMMER SMART
SWING
MUTE
TEP SWITCH
SLEEP
I FEEL SOFT
1
3
4
2