Kellyco Titan 2000XD Owner'S Manual Download Page 3

Page: 3 / 20

ASSEMBLY

Assembly is easy and requires no tools.

●

Position

the lower stem (the straight tube)

with the silver button toward the back.

Using the bolt and knurled knob, attach the

search coil to the plastic extension

protruding from the lower stem.

●

P ress

the button on the

upper end of the lower

stem, and slide the

lower stem into the

upper stem.

Adjust

the stem to a

length  that  lets  you
maintain a comfortable upright
posture, with your arm relaxed
at  your  side,  and  the  search
coil  parallel  to  the  ground  in
front of you.

●

Wind

the cable secure l y

around the stem.

●

I n s e rt

the plug into the

matching connector on the

right underside of the

detector body. Be sure that

the key-way and pins line

up correctly.

Caution:

Do not

f o rce the

plug in. Excess force

will cause damage.

To disconnect the

cable, pull on the

plug.

Do not pull

on the cable.

Titan2000MANUAL.qx6 4/22/08 12:29 PM Page 3

Summary of Contents for Titan 2000XD





















Search results

Summary of Contents for Titan 2000XD

Reviews:

Related manuals for Titan 2000XD

Brands by name

Popular brands

Kellyco Titan 2000XD, Owner'S Manual

Search results

Summary of Contents for Titan 2000XD

Reviews:

Related manuals for Titan 2000XD

Brands by name

Popular brands