5
8
usinG THe mP5 Pro meTal deTeCTor —
The
mP5 Pro
is a slow motion type detector, in other words the coil
must be in slow motion to respond to any target. By simply moving
the coil back and forth over the ground this motion will activate the
automatic ground balance and tuning circuits of you detector and keep
it at its optimum tuning levels. When scanning the ground try to keep
the search coil about 1 inch off the ground.
DO NOT
scrub the ground,
you may get some "False Signals" by doing that. Please refer to the
following drawings for the correct way to sweep and hold your metal
detector.
2
FeeT
Per
SeCOND
oPeraTion of ConTrols —
To operate and turn on the
mP5 Pro
simply turn the
on/off Vol-
ume Control
fully clockwise. Turning this same control counter-
clockwise will lower the volume.
TIP:
Adjust the Volume level that is comfortable for your personal
hearing if using an optional headphone. When not using headphones
keep volume at maximum so you will not miss the deeper targets.
After you have turned on the
mP5 Pro
you should now adjust the
Sensitivity Control
and the
Discriminate Control
to their
Pre-set
positions. This is only a starting point and will help you get familiar
with your new
mP5 Pro
.
PoWer on
/
off
Volume Switch.
• Factory
recommend
starting
point
(Pre-Set
Position)
DISCRIMINATE
VOLUME
ON / OFF
SENSITIVITY
PINPOINT
5
MP
PRO
High Performance – Deep Searching
0
1
3
2
4
5
6
7
8
9
10
PRE SET
PRE SET
0
1
3
2
4 5
6
7
8
9
10
0
1
3
2
4
5
6
7
8
9
10
PRE SET
Simply move the coil back and forth
over the ground.
