Kelly KBS Brushless Motor Controller User’s Manual
V 4.1
16
Suggestion: Set according to the practical situation, factory default is 10%.
(8)Brake Sensor Ending Point
Value range: 60%~100%
Functional description: Set brake sensor effective ending point
Suggestion: Set according to the practical situation, factory default is 90%.
4.5 Step 5
(1)Motor Temperature Sensor
Value range: Enable and Disable
Functional description: If use motor temperature sensor and enable this function, Controller
Stop Output Temperature and Controller Resume Output Temperature can be configured so as
to achieve real-time protection on the motor.
Suggestion: Set according to the practical situation.
(2)Controller Stop Output Temperature
Value range: 60
℃
~170
℃
Functional description: Controller will stop output if motor temperature reaches the set value.
Suggestion: Set according to the practical situation.
(3)Controller Resume Output Temperature
Value range: 60
℃
~170
℃
Functional description: Controller will resume output if motor temperature reaches the set value.
Suggestion: Set according to the practical situation.
Note: Thermistor is optional. Default to KTY84-130.
Chapter 5 Maintenance
There are no user-serviceable parts inside the controllers. Do not attempt to open the
controller as this will void your warranty. However, periodic, exterior cleaning of the controller
should be carried out.
The controller is a high powered device. When working with any battery powered vehicle,
proper safety precautions should be taken that include, but are not limited to, proper training,
wearing eye protection, avoidance of loose clothing, hair and jewelry. Always use insulated
tools.
5.1 Cleaning
Although the controller requires virtually no maintenance after properly installation, the following
minor maintenance is recommended in certain applications.
•
Remove power by disconnecting the battery, starting with battery positive.
