7
MAINTENANCE AND SERVICE
•
Make sure that the equipment is stable and cannot tip over when carrying out maintenance
and service work.
•
Replace damaged or worn parts to reduce the risk of injuries.
•
Carry out maintenance, service and checks in line with recommendations.
•
Only use spare parts with equal performance to reduce the risk of injuries and breakdowns.
•
All electrical repairs and electrical connections must be carried out by a qualified person.
Check that all nuts and bolts are tightened after maintenance and service work.
Always test the machine before starting work.
IMPORTANT! Check the oil level (gearbox) and lubricate grease points regularly!
IMPORTANT!
Avoid over-lubricating. Dirt collects easily on exposed grease and causes increased
wear. After lubrication, wipe excess grease off from couplings.
DANGER!
WARNING: Pressurised oil and fuel leaks can penetrate skin and cause serious
injuries. Do not use your hands to locate leaks. Use a piece of paper or cardboard
to search for leaks.
Kellfri AB has a policy of continuous product development and therefore reserves the right to make
modifications, e.g. to the design and appearance of the product, without prior notice.
TRANSPORTATION AND SET-UP
•
Check that the work area is free from bystanders, children and objects before driving off.
•
Always observe additional caution during transport and moving.
•
Ensure that the equipment or product is well anchored and that available transport lashings
are fitted.
•
Always position the load as low as possible. All protruding loads should be well anchored.
•
Respect the risk zones even during transport and moving.
•
Do not permit anyone to walk under suspended loads when carrying out lifts.
•
Trailers used for transport should have brakes that work.
•
An SMV sign must be attached when travelling on public roads.
•
Check tyre pressure - see information on sides of tyres. Do not exceed the maximum pressure!
•
Always store the equipment or product in a dry place, preferably under a roof, when not in use.
•
Ensure that the equipment or product is stable and cannot tip over.
•
Never permit children to play at the storage site.
•
Be aware of the tipping risk!
RECYCLING
For scrapping, the equipment/product must be dismantled and transported to
a recycling station designated by your local authority. Any liquids should be collected
and transported to a recycling station designated by your local authority. Contact
your local authority for further information.
Summary of Contents for 35-WKL140
Page 22: ...22 Table of Contents GREASE POINTS...
Page 24: ...24 Table of Contents Version 1 1...
Page 26: ...26 Table of Contents Version 1 1...
