background image

12

Table of contents 

WARNING DECALS

Make sure warning decals are always visible and clean them when necessary. Do not use a 

high-pressure washer directly on the warning decal. If apart with a decal is replaced, or the 
decal becomes worn or in any other way unusable, order a new set of decals.

SYMBOL

EXPLANATION

Read the operating manual! Warning! Before starting work 
Before maintenance, servicing or connecting and discon-
necting the machine, the tractor must be switched off and 
the ignition key removed. 
Ejection warning Keep your distance!

Risk zone 15 m.

No one should be in the vicinity of the machine during 

operation. 

Warning!
Rotating blades.

Warning! Oil jet from hydraulic hose.
Warning! Pressure in the line can penetrate the skin.
If this occurs, seek immediate medical attention!

Warning! Keep off the machine! 

The machine is intended for working alone.

Warning! Accident risk for children!
Children must be kept well away from the machine.

Always store the product on a dry surface, preferably under a 
roof, when not in use.

Product name:

Type:

Weight:

Year of manufacture:

Serial no.:

2006/42/EC

The product is CE-marked

Summary of Contents for 35-HKKFE





























Reviews: