7
ASSEMBLY INSTRUCTIONS:
Machine parts
1. Frame
2. Hopper
3. Gearbox
4. Spreader disc (with spreader blade)
5. Bolts
6. Adjustment levers
7. Mixer
INSTRUCTION:
•
Mount the gearbox (3) on the frame (2) and secure with bolts and nuts. Tighten
•
Mount spreader disc (4) on outgoing shaft and secure with inner and outer chuck collet
•
Mount the hopper (1) on the frame (2) and secure with 3 bolts and nuts.
•
Push the lever (6) through the slot on the bottom of the hopper. Mount the levers on the
frame and secure with suitable bolt and nut. When the levers are in position 0, tighten
the nuts on drawbars until the output hole is completely closed.
•
Mount lower mixer, turn anti-clockwise.
•
Attach the PTO shaft
1. Hopper
2. Frame
3. Gearbox
6. Adjustment levers
7. Mixer
4. Spreading disc with
spreader blades
Warning!
Compliance with the safety instructions
requires that the product is only used as
described in these instructions. It is the
user’s responsibility to read through the
instructions and comply with them.