background image

3

3

Table of contents

INTRODUCTION

Thank you for choosing a product from Kellfri AB. By following the general safety information, 

instruction manual and common sense, you will get many years of enjoyable use of the prod-

uct. Kellfri’s tools and machines are aimed for farmers with high demands on functionality.

PRODUCT INFORMATION

Generously sized trailer with rubber balloon wheels and 250 x 100 cm loading area, floor is 50 

cm from ground. 

The floor is made of mesh pattern so that material does not get caught on the floor. Impact 

resistant surface through hammarlack.

The tow bar has a handle and hitch for a 50 mm ball coupling allowing the trailer to be pulled 

both by towing vehicles or by hand. There is a 50 mm ball coupling at the back of the trailer to 

connect more trailers if and when the need arises.

The trailer can be supplemented with Kellfri’s galvanised pole rack, which gives you a versatile 

solution for both transport and storage of jump equipment! 

INTENDED USE

Trailer entended to transport lighter materials such as poles for horse jumps.

28-VBS+

Trailer with jump racks

Technical Specifications

Floor dimensions

2,500 x 1,000 mm

Floor height from the ground

500 mm

L x W x H

 4000 x 1000 x 500 mm

Coupling

50 mm

Wheels

16x 6.5-8

Weight

102 kg

Summary of Contents for 28 V Plus













Reviews: