Table of contents
→
5
STEPS BEFORE USE
Read the safety instructions and the operating instructions carefully. Make sure that you un-
derstand the safety instructions, operating instructions and warning decals. Use common
sense when using the product and suitable personal protective equipment. Always check the
performance of the machine combination to be used. It is important that these work in har-
mony. Ensure the equipment or product work as expected, and to guarantee the your safety
and others. Carry out a visual inspection of the equipment or product before use. Repair or
replace damaged or worn parts to reduce the risk of injury.
Grease moving parts and check that all nuts and bolts are tightened. Rectify if necessary.
Learn and remember the correct working method. Beginners must work slowly until they have
learned how the machine or product works. Users/customers are responsible for ensuring us-
ers can handle the situation. If users feel that the equipment is dangerous to use, it should not
be used.
•
Check the are before raking
•
Adjust the vehicles speed when driving on slopes or uneven ground
•
Make sure there are no foreign objects is stuck in the rake before using it.
•
Check the work area before operation. Make sure there are no people or animals nearby.
•
Clear working area of stones, branches or hidden obstacles that might be hooked or
snagged, causing injury or damage.
•
Be sure that the rake is properly mounted, right set and in good condition.
•
Know your controls and how to stop tractor/ATV and equipment quickly in an emer-
gency.
•
Practice the movement pattern calmly when raking
•
Maximux driving speed is 10km/h
MAINTENANCE AND SERVICE
Ensure that the unit is stable and cannot tip over during maintenance and service. Replace
damaged or worn parts immediately to reduce the risk of abrasion. Always perform mainte-
nance, service and inspection, as recommended. Use only original replacement parts or spare
parts with equivalent performance to reduce the risk of damage.
•
Regularly check the condition of the product. If cracks, bends are detected, don’t use the
product, repair or rplaced the damage part.
•
Worn parts should be replaced. Check that all locking pins are correctly mounted. Rinse
the feeder with water if necessary.
•
Always make a test drive before starting any operation
RECYCLING
When disposing the product, this must be disassembled and
transported to the intended location of the municipality.
Contact your municipality for further information.
