background image

7

• 

Check that the trailer is intact before connecting it to the vehicle

• 

Never drive with the rear of the trailer in the tilted position

• 

Always make sure the trailer is properly attached to the towing vehicle and does not 

come loose

• 

Never overfill the trailer, excess load may cause the trailer and towing vehicle to lose trac-

tion and slip out of control

• 

Do not load more than the maximum load of 410 kg

• 

Fill the trailer only with appropriate load, heavy load could cause the trailer to be difficult 

to maneuver and the platform difficult to tilt.

• 

Use only the trailer for its intended use

• 

Use only approved towing vehicles to tow the trailer with the (Garden Tractor / ATV)

• 

Always make sure that the combined weight of the towing vehicle and the driver must 

always be greater than the weight of load.

• 

DO NOT tow the trailer on public roads. The trailer is not approved for driving on public 

roads

• 

Maximum speed when driving 15km / h

• 

Do not make any sudden turns, it can cause the garden tractor / ATV’s wheels to rub 

against the trailer platform

• 

Always slow down before turning

Warning! 

For safety, this product should only be used in the manner 
described in this manual. The user is responsible for the in-
struction to be read through and followed.

AFTER USE

• 

Make sure the trailer standing on level ground when disconnecting.

• 

When parking on inclined ground, place block  at the wheels before disconnecting.

• 

To prolong the life of your trailer, do not let it stand outside. Keep it covered.

• 

Clean, rinse with water and dry your cart.

TRANSPORT AND STORING

Make sure the area is clear of people, children and objects prior to transportation. Always be 

extra careful during transport and movement. Ensure that the equipment or product is well 

anchored and that existing transport safety devices are installed. Always place the load as low 

as possible. Respect the danger zone even in the transport and movement. When lifting, never 

stand underneath a suspended load. Trailer used to transport should have functioning brakes.

Always keep the tool or product in a dry place, preferably under cover when not in use. Make 

sure that the equipment or product is stable and not likely to tip over. Never let children play 

at the storage site. Keep in mind the risk of tipping!

Summary of Contents for 27-DC

















Reviews: