Kellfri 23-TV25, Manual

Page: 14 / 20

14
Table of contents
7.
Fit the bogie to the trailer Insert the axle and lock with a washer and an R-clip.
Do the same on the other side of the trailer.
8.
Before fitting the wheels, pull the hydraulic hose through the hole and attach the electrical
cables to the chassis. Make sure the hose and the cables are not crushed or exposed to abrasion.
9.
Fit the wheels to the bogie. The wheels should have angled 90
°
grease nipples to make it
easier to attach the grease gun nozzle. Replace the wheel nipples if required. Hand tighten the
wheel nuts. NOTE: the wheel nut must not be tightened too much. Grease all wheel bearings,
wipe off any excess grease and the fit the hub cap.