Kellfri 23-TV15ATV Manual Download Page 2

2

INTRODUCTION 

Thank you for choosing a product from Kellfri AB. By following general safety information, 

operating instructions and common sense, you will have many years of enjoyable use of the 

product. Kellfris equipment and products are aimed to be use by active farmers with high 

demands on functionality.

PRODUCT INFORMATION

Strong galvanised construction, generous dimensions and bogie with sturdy cross-country 

wheels make this trailer the unbeatable workhorse in our range. Fixed front stem with raised 

grid to protect against load movement, extruded flaps for strength, easily detachable fold-

down side flaps, hanging tailgate with the option of restricting flap opening with a chain for 

spreading gravel etc.

The tailgate can easily be detached, as can the rear corner posts, giving a clear floor if re-

quired. Strong all-round trailer locks hold the flaps in place, metal-covered floor makes the 

trailer robust and suitable for tough driving, tipping with the aid of the ATV’s rear winch. Ro-

tatable 50 mm ball coupling for your safety, 1500 kg loading capacity for tough jobs and a 

value-for-money price - a workhorse from Kellfri.

INTENDED USE

Suitable for transporting loose materials such as hay, leaves, small goods, soil, etc. Take into ac-

count the maximume bearing capacity of the trailer, safety regulations and recommendations.

ART. NO

23-TV15ATV

Total length

3040 mm 

Floor length

2010 mm

Height

1330 mm

Headboard height

300 mm

Wight

310 kg

Load capacity

1500 kg 

Tyres

22 x 11-10

Tipping angle

55°

Ball coupling

50 mm 

Ground clearance

290 mm

23-TV15ATVFH

27 kg (optional)

Summary of Contents for 23-TV15ATV

















Reviews: